Updated: June 14, 2018
If your air conditioner was installed before 2010 and you don’t know what R22 is then you should probably find out more. R22 refrigerant is a chemical that keeps the air coming from your air conditioning system cool, so it’s certainly incredibly critical. Most air conditioning units older than 10 years use an AC refrigerant called R22 that’s commonly known as Freon*, and is noted by the EPA as HCFC-22. In this guide, we’ll use the name R22. This refrigerant was introduced in the 1950s and became the main AC refrigerant in the residential heating and cooling industry.
The Montreal Protocol
Fast forward a few decades and the world realized that R22 refrigerant was aiding in the depletion of the Earth’s ozone layer. Not cool. So, the U.S. EPA, in cooperation with other agencies and groups around the world, started a phase out of lots of ozone-depleting agents as part of an international agreement known as the Montreal Protocol. The regulation lists many HCFCs and CFCs (different types of refrigerants that deplete the ozone layer), but R22 is believed to be one of the worst offenders.
Timeline and R22 phase out progress in 2018
In 2003, the phase out of R22 production and imports began. By the start of 2010 the production and import of R22 decreased. However, servicing current, existing equipment is still permitted as long as there is an available supply of R22. To ensure the public’s compliance with the new law, all sales of R22 must be acquired by a certified technician. R22 production and import will be continually reduced by law until 2020, when all production and import will be forbidden. Only recycled R22 refrigerant will be available to service existing air conditioners after 2020.
The graph above shows the EPA’s consumption allowance of R22 by percentage. The limits on R22 consumption were implemented in 2010 and follow a declining trend until 2020.
So how does this affect prices?
If you are starting to think this is a great topic for an economics professor regarding supply and demand, then you are on the right track. As you might assume, older air conditioners more often have leaks and need repairs. Any units that are older than 2010 are more likely to use R22, which means there’s a lot more demand for it, and a restricted supply. Prices have only risen due to scarcity.
Recall that in order to purchase R22, you have to be an EPA-certified technician. So, the average homeowner isn’t able to purchase a cylinder themselves. Also, there are some stern regulations now on how refrigerant should be reclaimed and recycled, which increases expenses. This expense is passed on to the homeowner as companies have to cover the increased overhead related to R22 repairs. There are requirements for importing, labeling, record keeping, reporting, destruction and reclaiming of R22 from existing systems.
So, how will this affect you?
The cost of R22 is radically increasing because of the dwindling supply, and new refrigerant will no longer be available for use at all after 2020, except from recycled quantities.
If you’re thinking, “Holy cow, this is starting to sound expensive,” you’re right, it is. This is why when our professionals come out to inspect your unit we look to see what refrigerant your unit uses, and lots of cases, we’ll advise an upgrade as a result of the increasing cost of maintaining an R22 air conditioner.
How do I know if my unit uses R22?
If you own an air conditioning system that was built before 2010, your AC will likely have R22. However, if you installed your air conditioner after January 1, 2010, then your unit may not have R22. You can find the type of refrigerant your system runs on by looking at the appliance’s nameplate. This nameplate is usually found on the outdoor condenser of your central air conditioning system. If you don’t find it, you can check your user’s manual. Otherwise, you can contact your local Service Experts center. If you have a maintenance agreement with us, we also have your information on hand and a tech can let you know right away if your unit uses R22.
Instead of Freon, use Puron
The industry has made the switch from R22 to R410a, which you may identify by the brand name Puron. In the remainder this article, we’ll use the name R410a (although Puron is a familiar brand, there are other companies that make R410a). There are some key benefits to switching from an R22 air conditioning unit to one that uses R410a. It has a higher safety rating and an ozone depletion rating of zero, and it performed slightly better on energy-efficiency tests than R22.
You may have heard of “drop-in” replacements for R22. We strongly recommend against this choice. Typically a homeowner who is uneasy about the cost of replacing their air conditioner seeks out an alternative, and this feels like an easy solution. It usually costs the homeowner more money, and almost always voids the manufacturer warranty. The truth about “drop-ins” is that there is no “drop-in” solution where you just swap out the refrigerant. The phrase “drop-in” is indicating retrofitting a air conditioner, which when done correctly can cost the homeowner as much, or more, money than buying a new unit that uses R410a. In part, this is because different refrigerants operate at different pressure levels and require different parts to run, which forces the technician to replace the most expensive components of your system to work with the new refrigerant. If this critical step is missed, your system will quickly stop working, and you’ll end up installing a new unit anyway.
Your manufacturer will typically not pay for the parts to make this transition because retrofitting your AC system will likely void the warranty. It’s normally just a temporary fix, but shopping for a new upgraded AC system will probably benefit most homeowners in dependability, satisfaction, and long-term comfort.
It’s better to discuss pricing options with your HVAC provider if you’re worried about cost. At Service Experts Heating & Air Conditioning, we offer financing that makes a replacement affordable, and we keep track of any manufacturer and utility rebates that would make it easier to swallow an unexpected replacement. To avoid emergencies on a hot day, lots of our customers choose to do a pre-emptive replacement, and replace an old system before it doesn’t work. If you’re of a similar mind, then you’re in good company!
If your unit was built after 2010, you’re probably safe
If your heating and air conditioning system was built after January 2010, the R22 phase out dilemma may not apply to you, because it’s likely that your system uses the new, approved replacement refrigerant, R410a. However, air conditioners installed after 2010 could still use R22, so it’s best to check with an HVAC Expert. You can always look for and the refrigerant type by checking the nameplate on your condenser (the condenser is the outside unit).
What do I do if my air conditioner uses R22?
To recap, if your HVAC equipment was produced prior to January 2010, especially if it’s older than a decade, you have these options:
- Buy an upgraded, more environmentally-friendly system that uses R410a.
- Contact an expert to replace the parts in your current AC system to help make it compatible with an approved air conditioner refrigerant. This is not recommended.
- Keep using recycled R22 and burn money like it’s the ozone layer.
To be clear, the EPA regulates the production and use of this refrigerant, but not your unit. You aren’t required by law to replace your air conditioner. At some point, your AC will quit running and it will need to be replaced, and only R410a units will be available to purchase.
The most straightforward option is to buy a new, upgraded air conditioner, particularly if your current air conditioner is already more than 10 years old. Service Experts Heating & Air Conditioning has several financing options that help to meet your budget, and again, we look out for rebates from HVAC manufacturers and local utilities to make it even easier. New AC equipment is more efficient and offer you superior comfort, helping to decrease your energy costs.
We do have one more option available in select locations. To provide our customers with high-quality equipment and service at competitive rates, we started the Advantage Program, which is a worry-free program that provides HVAC equipment with a full coverage repair and maintenance plan for a low monthly price.
You could also choose the status quo and continue using recycled R22 air conditioning refrigerant for the foreseeable future. While this sounds like a nice alternative, the price of servicing old R22 A/C systems is starting to go over several hundred dollars (easily a down payment on a new system). You may also see the prices grow as demand continues to rise on a substance that is no longer produced or widely obtainable.
If you aren’t confident what type of AC refrigerant your air conditioning system uses, we can help. Contact Service Experts Heating & Air Conditioning today and we can provide an inspection to determine if you are currently using R22 and, if so, what you can do.
The good news
While making the transition to an approved AC refrigerant may intimidating, it’s helping to save the ozone layer. These regulations will help defend the ozone layer in the Earth’s atmosphere, which helps block radiation from the sun and prevents serious illnesses, such as skin cancer. It’s not exaggerated to say that you, as a homeowner, are a grand part of this by replacing an old R22 unit with a newer, ozone friendly unit.
If you have any questions, please use us for a free, in-home consultation by filling out the form below.
*Freon is a registered trademark of the DuPont Corporation